LED Canopy light fixtures are an environmentally friendly, cost-effective, maintenance-free alternative to traditional lighting. LED Canopy fixtures use up to 75% less energy than HID and contain no mercury. These LED fixtures are extremely durable, providing quality, efficient maintenance-free illumination for twelve years. The fixtures can be mounted to a recessed outlet box or be surface-mounted. They can be cleaned with a simple hose down.
LED Canopy Lighting Fixture 12x12 Square 60 Watts
Whether you are lighting exteriors, entry ways, breezeways, walkways, perimeters, parking garages, storage areas, or industrial/commercial spaces, LED Canopy fixtures are the perfect solution.
* Heavy duty die cast aluminum housing
* Injection molded polycarbonate lens
* Silicon gasket ensures moisture and dust free enclosure
* Comparable to 175W MH or 200 Watt HPS
LED Canopy Construction:
Luminaire is constructed of a one-piece cast aluminum alloy.
Lens: Lens made of a clear single piece UV stabilized prismatic polycarbonate.
The LED light engine utilizes an aluminum metal clad board for maximum heat transfer, resulting in a longer life. The module consists of various orientations & arrangements allowing direction and intensity of the light to be controlled. Control of the LEDs allow our fixtures to maintain light levels equal to or greater than that of MH and HPS fixtures at a much lower energy consumption level and with an expected life that is greater than 50,000 hours.
Class II constant current device is with a high-power factor correction to maximize power utilization. It meets UL 1310/UL 48 Class 2 (also available with Class 1) with a built-in over-temperature protection (>90°C). All drivers are 100% factory tested. Input voltage ranges from 120 to 277 VAC. It passes FCC part 15, class B for both conducted and radiated emissions.
Finish is polyester powder coat paint, 2.5 mil nominal thickness. The standard color is bronze.
Fixture mounts to a recessed outlet box or can be surface mounted, or the fixture can be suspended from a 1/2" rigid conduit.
LED Canopy Fixture Details:
Warranty: 5 Years
Life Hours: 50,000
Dimensions: 12.4"W x 12.4"D x 8.8"H
Color Temperature: 6,000K (Cool-white / daylight)
Lens Type: Polycarbonate, 12 inch, square
Operating Temperature: -20 to 160F
Power Access: 1/2" conduit access, side knockouts
LED Driver Voltage: Electronic Multi-Volt 120V-277V
UL Listed for wet locations
Optimal Mounting Height: 15-20 feet
Lumen Output: 4,860 lumens
Canopy fixture installation warning:
should be performed by a qualified electrician. Supply power
should be turned off when replacing components or checking connections.
Never perform maintenance or cleaning while fixture is energized.
note, these are normal stock items, but if not in stock at the time of
order, they are built to order and currently taking about 10-14 business
days to build and they ship the day they are built.